@conference {14986,
	title = {Mitigating risk of data loss in preservation environments},
	booktitle = {Mass Storage Systems and Technologies, 2005. Proceedings. 22nd IEEE / 13th NASA Goddard Conference on},
	year = {2005},
	month = {2005/04//},
	pages = {39 - 48},
	abstract = {Preservation environments manage digital records for time periods that are much longer than that of a single vendor product. A primary requirement is the preservation of the authenticity and integrity of the digital records while simultaneously minimizing the cost of long-term storage, as the data is migrated onto successive generations of technology. The emergence of low-cost storage hardware has made it possible to implement innovative software systems that minimize risk of data loss and preserve authenticity and integrity. This paper describes software mechanisms in use in current persistent archives and presents an example based upon the NARA research prototype persistent archive.},
	keywords = {archives;, authentication;, authenticity;, computing;, data, databases;, digital, distributed, environment;, Grid, integrity;, management;, message, objects;, persistent, preservation, record, risk, storage},
	doi = {10.1109/MSST.2005.20},
	author = {Moore,R.W. and JaJa, Joseph F. and Chadduck,R.}
}
@conference {13211,
	title = {A spherical microphone array system for traffic scene analysis},
	booktitle = {Intelligent Transportation Systems, 2004. Proceedings. The 7th International IEEE Conference on},
	year = {2004},
	month = {2004/10//},
	pages = {338 - 342},
	abstract = {This paper describes a practical spherical microphone array system for traffic auditory scene capture and analysis. Our system uses 60 microphones positioned on the rigid surface of a sphere. We then propose an optimal design of a robust spherical beamformer with minimum white noise gain (WNG) of -6 dB. We test this system in a real-world traffic environment. Some preliminary simulation and experimental results are presented to demonstrate its performance. This system may also find applications in broader areas such as 3D audio, virtual environment, etc.},
	keywords = {-6, 3D, analysis;, array, arrays;, audio;, auditory, beamformer;, capture;, dB;, environment;, gain;, microphone, NOISE, noise;, processing;, real, robust, scene, signal, spherical, system;, traffic, traffic;, virtual, white, World},
	doi = {10.1109/ITSC.2004.1398921},
	author = {Zhiyun Li and Duraiswami, Ramani and Grassi,E. and Davis, Larry S.}
}
@conference {13244,
	title = {Image-based pan-tilt camera control in a multi-camera surveillance environment},
	booktitle = {Multimedia and Expo, 2003. ICME {\textquoteright}03. Proceedings. 2003 International Conference on},
	volume = {1},
	year = {2003},
	month = {2003/07//},
	pages = {I - 645-8 vol.1 - I - 645-8 vol.1},
	abstract = {In automated surveillance systems with multiple cameras, the system must be able to position the cameras accurately. Each camera must be able to pan-tilt such that an object detected in the scene is in a vantage position in the camera{\textquoteright}s image plane and subsequently capture images of that object. Typically, camera calibration is required. We propose an approach that uses only image-based information. Each camera is assigned a pan-tilt zero-position. Position of an object detected in one camera is related to the other cameras by homographies between the zero-positions while different pan-tilt positions of the same camera are related in the form of projective rotations. We then derive that the trajectories in the image plane corresponding to these projective rotations are approximately circular for pan and linear for tilt. The camera control technique is subsequently tested in a working prototype.},
	keywords = {automated, camera, cameras;, control;, detection;, environment;, image, image-based, information;, multicamera, object, pan-tilt, position;, processing;, sensors;, Surveillance, surveillance;, systems;, vantage, zero-position;, zero-positions;},
	doi = {10.1109/ICME.2003.1221000},
	author = {Lim,Ser-Nam and Elgammal,A. and Davis, Larry S.}
}
@conference {16896,
	title = {Simultaneous pose and correspondence determination using line features},
	booktitle = {Computer Vision and Pattern Recognition, 2003. Proceedings. 2003 IEEE Computer Society Conference on},
	volume = {2},
	year = {2003},
	month = {2003/06//},
	pages = {II-424 - II-431 vol.2 - II-424 - II-431 vol.2},
	abstract = {We present a new robust line matching algorithm for solving the model-to-image registration problem. Given a model consisting of 3D lines and a cluttered perspective image of this model, the algorithm simultaneously estimates the pose of the model and the correspondences of model lines to image lines. The algorithm combines softassign for determining correspondences and POSIT for determining pose. Integrating these algorithms into a deterministic annealing procedure allows the correspondence and pose to evolve from initially uncertain values to a joint local optimum. This research extends to line features the SoftPOSIT algorithm proposed recently for point features. Lines detected in images are typically more stable than points and are less likely to be produced by clutter and noise, especially in man-made environments. Experiments on synthetic and real imagery with high levels of clutter, occlusion, and noise demonstrate the robustness of the algorithm.},
	keywords = {algorithm;, algorithms;, annealing;, clutter;, cluttered, Computer, correspondence, detection;, determination;, deterministic, environment;, extraction;, feature, feature;, image, image;, imagery;, images;, joint, line, local, man-made, MATCHING, matching;, measurement;, model-to-image, noise;, occlusion;, optimum;, perspective, point, pose, position, problem;, processing;, real, realistic, registration, simulated, softassign;, SoftPOSIT, stereo, synthetic, vision;},
	doi = {10.1109/CVPR.2003.1211499},
	author = {David,P. and DeMenthon,D. and Duraiswami, Ramani and Samet, Hanan}
}
@article {18389,
	title = {Experiences building a syntax-directed editor},
	journal = {Software Engineering Journal},
	volume = {4},
	year = {1989},
	month = {1989/11//},
	pages = {294 - 294},
	abstract = {The paper presents a set of techniques for building robust software using the development of a microprocessor SUPPORT programming environment as an example. It discusses some of the attributes built into the system to best handle the concerns of portability, functionality, and effectiveness that had to be dealt with for the system to be reliable on a small machine, and it describes some of the choices made to obtain the best use of available hardware},
	keywords = {applications;, editing;, editor;, engineering;, environment;, environments;, microcomputer, microprocessor;, portability;, Programming, robust, software, software;, Support, syntax-directed, text},
	isbn = {0268-6961},
	author = {Zelkowitz, Marvin V and Kowalchack,B. and Itkin,D. and Herman,L.}
}
