@conference {18245,
	title = {Modeling temporal correlations in content fingerprints},
	booktitle = {Acoustics, Speech and Signal Processing (ICASSP), 2011 IEEE International Conference on},
	year = {2011},
	month = {2011/05//},
	pages = {1860 - 1863},
	abstract = {Previous analysis of content fingerprints has mainly focused on the case of independent and identically distributed finger prints. Practical fingerprints, however, exhibit correlations between components computed from successive frames. In this paper, a Markov chain based model is used to capture the temporal correlations, and the suitability of this model is evaluated through experiments on a video database. The results indicate that the Markov chain model is a good fit only in a certain regime. A hybrid model is then developed to account for this behavior and a corresponding adaptive detector is derived. The adaptive detector achieves better identification accuracy at a small computational expense.},
	keywords = {chain, correlations;video, database;Markov, databases;, databases;video, detection;fingerprint, detector;certain, fingerprints;hybrid, identification;temporal, Markov, model;adaptive, model;temporal, processes;adaptive, regime;content, signal},
	doi = {10.1109/ICASSP.2011.5946868},
	author = {Varna,A.L. and M. Wu}
}
@conference {12683,
	title = {Multiple view tracking of humans modelled by kinematic chains},
	booktitle = {Image Processing, 2004. ICIP {\textquoteright}04. 2004 International Conference on},
	volume = {2},
	year = {2004},
	month = {2004/10//},
	pages = {1009 - 1012 Vol.2 - 1009 - 1012 Vol.2},
	abstract = {We use a kinematic chain to model human body motion. We estimate the kinematic chain motion parameters using pixel displacements calculated from video sequences obtained from multiple calibrated cameras to perform tracking. We derive a linear relation between the 2D motion of pixels in terms of the 3D motion parameters of various body parts using a perspective projection model for the cameras, a rigid body motion model for the base body and the kinematic chain model for the body parts. An error analysis of the estimator is provided, leading to an iterative algorithm for calculating the motion parameters from the pixel displacements. We provide experimental results to demonstrate the accuracy of our formulation. We also compare our iterative algorithm to the noniterative algorithm and discuss its robustness in the presence of noise.},
	keywords = {3D, algorithm;, analysis;, body, calibrated, cameras;, chain, displacement;, error, estimation;, human, image, iterative, kinematic, kinematics;, methods;, model;, MOTION, motion;, multiple, parameters;, perspective, Pixel, processing;, projection, sequences;, signal, tracking;, video, view},
	doi = {10.1109/ICIP.2004.1419472},
	author = {Sundaresan, A. and Chellapa, Rama and RoyChowdhury, R.}
}
@conference {12705,
	title = {Vehicle detection and tracking using acoustic and video sensors},
	booktitle = {Acoustics, Speech, and Signal Processing, 2004. Proceedings. (ICASSP {\textquoteright}04). IEEE International Conference on},
	volume = {3},
	year = {2004},
	month = {2004/05//},
	pages = {iii - 793-6 vol.3 - iii - 793-6 vol.3},
	abstract = {Multimodal sensing has attracted much attention in solving a wide range of problems, including target detection, tracking, classification, activity understanding, speech recognition, etc. In surveillance applications, different types of sensors, such as video and acoustic sensors, provide distinct observations of ongoing activities. We present a fusion framework using both video and acoustic sensors for vehicle detection and tracking. In the detection phase, a rough estimate of target direction-of-arrival (DOA) is first obtained using acoustic data through beam-forming techniques. This initial DOA estimate designates the approximate target location in video. Given the initial target position, the DOA is refined by moving target detection using the video data. Markov chain Monte Carlo techniques are then used for joint audio-visual tracking. A novel fusion approach has been proposed for tracking, based on different characteristics of audio and visual trackers. Experimental results using both synthetic and real data are presented. Improved tracking performance has been observed by fusing the empirical posterior probability density functions obtained using both types of sensors.},
	keywords = {acoustic, applications;, audio, audio-visual, beam-forming, Carlo, chain, density, detection;, direction-of-arrival, DOA, empirical, estimation;, framework;, functions;, fusion, fusion;, joint, Markov, methods;, Monte, moving, multimodal, object, optical, posterior, probability, probability;, processes;, processing;, sensing;, sensor, sensors;, signal, Surveillance, surveillance;, systems;, target, techniques;, tracking;, vehicle, video},
	doi = {10.1109/ICASSP.2004.1326664},
	author = {Chellapa, Rama and Qian,Gang and Qinfen Zheng}
}
@conference {12765,
	title = {3D face reconstruction from video using a generic model},
	booktitle = {Multimedia and Expo, 2002. ICME {\textquoteright}02. Proceedings. 2002 IEEE International Conference on},
	volume = {1},
	year = {2002},
	month = {2002///},
	pages = {449 - 452 vol.1 - 449 - 452 vol.1},
	abstract = {Reconstructing a 3D model of a human face from a video sequence is an important problem in computer vision, with applications to recognition, surveillance, multimedia etc. However, the quality of 3D reconstructions using structure from motion (SfM) algorithms is often not satisfactory. One common method of overcoming this problem is to use a generic model of a face. Existing work using this approach initializes the reconstruction algorithm with this generic model. The problem with this approach is that the algorithm can converge to a solution very close to this initial value, resulting in a reconstruction which resembles the generic model rather than the particular face in the video which needs to be modeled. We propose a method of 3D reconstruction of a human face from video in which the 3D reconstruction algorithm and the generic model are handled separately. A 3D estimate is obtained purely from the video sequence using SfM algorithms without use of the generic model. The final 3D model is obtained after combining the SfM estimate and the generic model using an energy function that corrects for the errors in the estimate by comparing local regions in the two models. The optimization is done using a Markov chain Monte Carlo (MCMC) sampling strategy. The main advantage of our algorithm over others is that it is able to retain the specific features of the face in the video sequence even when these features are different from those of the generic model. The evolution of the 3D model through the various stages of the algorithm is presented.},
	keywords = {3D, algorithm;, algorithms;, analysis;, Carlo, chain, Computer, Face, from, function;, generic, human, image, Markov, MCMC, methods;, model;, Monte, MOTION, optimisation;, OPTIMIZATION, processes;, processing;, recognition;, reconstruction, reconstruction;, sampling;, sequence;, sequences;, SfM, signal, structure, surveillance;, video, vision;},
	doi = {10.1109/ICME.2002.1035815},
	author = {Chowdhury, A.R. and Chellapa, Rama and Krishnamurthy, S. and Vo, T.}
}
